Figure 8 shows the trajectories of the magnetization at the top o

Figure 8 shows the trajectories of the magnetization at the top of the hard layer projected onto the x-z plane when the dc and microwave fields are (a) H dc = 16.6 kOe, H ac = 0.5 kOe and (b) H dc = 11.4 kOe, H ac = 0.6 kOe at an angle of incidence of 0°. Figure 8a shows magnetization switching induced

by large damping in the early stage of the Necrostatin-1 in vivo switching process. The magnetization switching process seems to be an unstable switching according to the comparison between theoretical analysis and micromagnetic simulation as shown in Figures 2 and 3, respectively. On the other hand, the precessional oscillation is observed at H dc = 11.4 kOe with H ac = 0.6 kOe. Magnetization switching involving precessional oscillation was also observed in the stable switching of the Stoner-Wohlfarth grains. This implies that unstable and stable switching occurs under the conditions (a) and (b), respectively, in the ECC grains, indicating that the microwave-assisted check details switching behavior of the ECC grains qualitatively agrees with the theory predicted by Osimertinib Bertotti [21, 22] and micromagnetic simulation by Okamoto [14]. Figure 7 Switching field of the ECC grain. The dc field incident angles are (a) 0°, (b) 15°, (c) 30°, and (d) 45°. Figure 8 Trajectories of the magnetization at the top of the hard section for the ECC grain. Projected onto the x-z plane under the field conditions (a) H dc = 16.6 kOe, H

ac = 0.5 kOe and (b) H dc = 11.4 kOe, H ac = 0.6 kOe at 0 K. The dc field incident angle is 0°. Figure 9 shows the probability in magnetization switching events of the ECC grains at the finite temperature T = 400 K. Figure 9a,b,c,d is for the incident angles of 0°, 15°, 30°, and 45°, respectively. As concluded from the magnetization behavior shown in Figure 8, the switching probability widely distributes in H dc and H ac when the incident angle is 0°, which is probably the evidence

for unstable switching. On the other hand, the distribution becomes very narrow when the incident angle increases in the same manner as that in Stoner-Wohlfarth grains. This also implies that the reduction in the unstable switching area is due to the incident angles. Figure 9 Magnetization Exoribonuclease switching probability distribution for the ECC grain at 400 K. With incident angles of (a) 0°, (b) 15°, (c) 30°, and (d) 45°. Conclusions Magnetization switching behavior of a nanoscale ECC grain under microwave assistance has been numerically analyzed by comparing it with that of a Stoner-Wohlfarth grain. The computational simulation indicated that significant switching field reduction due to relatively large microwave field excitation is observed in the ECC grains. Therefore, the magnetization switching in the ECC grain under microwave assistance seems to be divided into two regions of stable and unstable switching depending on applied dc and microwave field strength.

Comments are closed.